Skip to content
Dealer Locator Buy Now
Dealer Locator
Buy Now
    ZRC Blue Label grouping text 4

    ZRC® Cold Galvanizing Compound

    Proven protection equivalent to hot-dip galvanizing. With 95% zinc by weight in dried film, ZRC® Cold Galvanizing Compound exceeds ASTM A780 and SSPC Paint 20 standards.

    Buy Now Contact A Dealer
    Order now and we’ll ship within 24 hours!
    Buy Now

    At-A-Glance: ZRC® Cold Galvanizing Compound

    Equivalent to hot-dip galvanizing, ZRC’s Cold Galvanizing Compound is manufactured with the highest purity ASTM D520 Type III zinc dust. Meeting VOC standards in all fifty states, it passes ten-year subtropical exposure testing and exceeds ASTM A780 standards for hot-dip galvanic repair. With flexible application formats, our product is the industry standard in combating corrosion, for true galvanic protection.

    zrc-location-icon Use Cases zrc-location-icon Application Formats zrc-location-icon Specifications zrc-location-icon Product Documentation
    Recommended Uses
    ZRC is widely used without topcoats in place of hot-dip galvanizing and is deployed as a high-performance base coat with a variety of topcoats. Used for:
    Hot-Dip Galvanizing Repair & Regalvanizing A more accessible option for repair of worn hot-dip galvanized materials.
    Weldments Repair Our original compound can be used to repair weldments.
    Long-Term Protection It’s proven to be effective long-term protection for: structural steel, water and waste facilities, power plants, transmission towers and antennae, steel decking and bridges, and numerous OEM uses.
    Inorganic Zinc Coatings Repair ZRC is also effective for inorganic zinc coatings repair.
    Galvalume® and Zinc Metallizing Galvilite can be used for Galvalume® and zinc metalizing projects.

    Flexible Application Formats


    Unlike hot-dip galvanizing, ZRC is portable, flexible protection that can be applied in a variety of formats.
    Brush, Roller, and Aerosol
    Spray (Low Pressure Compressor)
    Spray (Airless)
    Roller

    Brush, Roller, and Aerosol

    Apply as received in the container. For brush application, we recommend only 100% Natural Chinese Bristle brushes. For roller application, we recommend rollers with a 3/8” nap, made of mohair or lambs wool (sheepskin).
    Paint Sprayer

    Spray (Low Pressure Compressor)

    ZRC can also be applied as a spray. Notes:

    • Atomized Air Pressure 50 Lbs (1.3 kg/cm²)

    • Fluid Pressure:15 to 20 Lbs (0.4-0.6 kg/cm²)

    • Orifice of Tip: 0.080 inches (0.20 cm)

    • Viscosity Reduction: 4:1 Mineral spirits -OR- 16:1 Xylene
    Worker Using Airless Sprayer

    Spray (Airless)

    Recommended Procedure: Connect hose directly to pump ensuring a hose length of 50 ft. max. Use the least pressure possible. Start at 1500 lbs. (680 kg) and increase as required for good spraying. Notes:

     

    • Pump: 30:1 Ratio

    • Hose: 1/2" (1.3 cm)(I.D.) Airless Type

    • Orifice of Tip: 60° - .026 in. (0.07 cm)

    • Type of Tip: Tungsten carbide, reversing

    • Filter Screens Complete removal is recommended. However, if screens are employed, use no less than 30 mesh.

    • Viscosity: No reduction required.

    Specifications: ZRC Cold Galvanizing Compound

    Here are the details for our industry-leading product:

    Specifications
    SSPC Paint Specification 20 – Zinc-Rich Coating: Type II – Organic; Level 1 – equal to or greater than 95% zinc dust by weight present in the dried film
    Zinc Dust Content
    ASTM D 520 Type III Zinc Dust - .002% maximum lead by weight 
    Weight and VOC Notes
    Weight per gallon – not less than 24 lbs. VOC Content — ASTM D 3960, 385 g/l (3.3 lbs per gallon) maximum
    Color and Gloss
    Color and Gloss – Matte finish, “battleship grey”
    Manufacturers

    Manufacturers: Subject to compliance with requirements, provide galvanizing compound by one of the following: 

    1. ZRC Cold Galvanizing Compound, ZRC Worldwide 

    (www.zrcworldwide.com, (800 831-3275 )) 

    1. No known equal. 

    Follow manufacturer’s application instructions

     

    Manufacturer to provide Certificate of Conformance to above criteria.

    Part Numbers
    10000 - ZRC Cold Galvanizing Compound Aerosol 12oz.

    10001 - ZRC Cold Galvanizing Compound Half Pint

    10002 - ZRC Cold Galvanizing Compound Quart

    10003 - ZRC Cold Galvanizing Compound Gallon

    10004 - ZRC Cold Galvanizing Compound 3.5 gal Pail

    Quotes from Our Customers

    It’s no secret we’re the industry-leading solution that lasts. Here’s what our
    customers have to say.

    Because of my experience in the field with this product, I always recommend ZRC in corrosive applications. I've used ZRC to regalvanize radar towers and catwalk gratings for the Navy at the base in Winter Harbor, Maine. I also used it on metal roofs and on salt water cookers at a canning company. In all cases, it has provided five years or more of rust-free protection.

    Roy Love | President, Loves Painting

    DAI needed a coating that was equivalent to hot-dip galvanizing since many major components are too big to fit in the galvanizing tanks," "ZRC provides the equivalent corrosion protection of ASTM A 123 galvanizing and is applied directly over sandblasted A 36 steel prior to top coating with chlorinated rubber or epoxy.

    Sandy Boog-Scott | Director of Materials, DAI

    Of all the painting systems I have used to protect ironwork in the past ten years, ZRC top coated with epoxy works the best — even in highly corrosive, humid environments.

    Doug McLean | President, McLean's Blacksmithing, Inc., Galveston TX
    Go With The Experts

    Imitation is flattering, but the proof is in the paint. ZRC Worldwide created zinc coating technology to combat corrosion and has been a worldwide leader in the space for 70 years.

    Dealer Locator
    ZRC galvanizing compound for iron and steel